MF52A epoxy resin type NTC thermistor sensor is suitable for battery temperature sensors in the automotive industry

Product name: Epoxy resin encapsulated NTC temperature sensor

Standard resistance (according to customer requirements): R25℃=1KΩ～200KΩ±1% B25/50=3950K±1%

Working temperature: -30~125℃

Features: Ambient temperature measurement/sensitive response/small size/good consistency

Applicable to: heaters, air conditioners, refrigerators, wine cabinets, motors, lithium batteries, street lights, charging piles, etc.

Features of Epoxy Coating NTC Thermistor Sensor

1. MF52 series products are coaxial lead epoxy resin coating type

2. Wide resistance range: 500KΩmax

3. High accuracy of resistance and B value

4. Moisture proof, good insulation, high reliability, small time constant

5. Small volume, fast reflection speed

6. Can work steadily for a long time, good consistency

7. Wide range of operating temperature

Application Of Epoxy Resin Thermistor NTC Sensor

NTC sensor is widely used in temperature measurement for induction cooker, rice cooker, microwave oven, water machine, electric kettle, heater, air conditioner, refrigerator, water dispenser, disinfection cabinet, washing machine, coffee maker and so on household appliances. Besides, the sensors are applicable to automobile, Internet of things,medical temperature measurement, industrial temperature measurement, garden temperature control and breeding industry etc.

A:(Tin. nickle Cu or Cp wire)
Normal dimension table

B:(Enamelled cu wire)
Normal dimension table

C:(High-temperature wire)
Normal dimension table

D:(Normal temperature wire)
Normal dimension table

E:Lead and head are all special specification)
Normal dimension table

DE:(Cp Lead Coated with epoxy resin)
Normal dimension table

F:(Tinned steel wire)
Normal dimension table

Series Data Of The NTC Thermistor Temperature Sensor

Temperature Measurement With Thermistor Sensor

The thermistor sensor, which is used to measure temperature, is simple in structure and low in price.

Thermistors without external protective layers can only be used in dry areas; sealed thermistors are resistant to moisture and can be used in harsh environments.

Because the resistance value of thermistor sensor is relatively large, the resistance and contact resistance of its connecting wires can be ignored.

Therefore, thermistor sensor can be applied in long-distance temperature measurement up to several thousand meters, and the measurement circuit mostly adopts bridge.

The principle can also be used for other temperature measurement, temperature control circuit.

MF52/MF5A Main technical parameters of temperature-measuring thermoelectric resistance

Features
Rohs compliant
small size, fast response
excellent thermal cycle endurance

superior solderadility and resistance to soldering heat shock

moisture resistant
wide resistance range

high stability steady
good quality of coherence and interchange

-40 ~125 ℃ operating temperature range

Application:

1. Air-condition Equipment

2. Heating Apparatus

3. Electric Thermometer

4. Liquid Level Sensor

5. Automotive electronics

6. Electronic calendar

7. Battery of Mobile Telephone

Parameters

Product Specifications

specifications and models	MF52A1 103F3950
Product standard	Q/320115SHD03-2008

1. Overall dimensions

Dmax	L1max	L2 ± 3	F d ± 0.05	F ± 0.5
2.6	4.5	30	0.35	2.0

2. Materials

Encapsulating material	colour	Lead material
modified resin	black	Tinned steel wire

3. Model description

MF52	A1	103			F	3950
Bead temperature measuring NTC thermistor	Lead tinned steel wire	Resistance value			Resistance tolerance	B value (25/50)
			10K	Ω	±1%	3950K

4. Electrical performance

	project	symbol	test condition	unit	performance requirement
4.1	Zero power resistance at 25℃	R25	Ta=25±0.05℃ Test power ≤0.1mW in flowing liquid.	KΩ	10±1%
4.2	B value	25/50	B=[(T a ´Tb )∕(Tb -T a )]× ln( Ra ∕ Rb ) Tb = 50 ℃±0.1℃	K	3950±1%
4.3	dissipation factor	d	In still air	mW∕℃	≥2
4.4	characteristic time	t	In still air	sec	≤7
4.5	insulance	∕	100V∕DC1min	MΩ	≥100
4.6	operating temperature range	∕	∕	℃	-40~120
4.7	Resistance-temperature characteristic	∕	∕	∕
4.8	Resistance error	∕	∕	∕

5. Reliability performance test

project

Test conditions and methods

technical requirement

5.1	soldering resistance	Immerse the lead in the tin solution at 235+/-5℃, with the tin surface 6mm away from the lower end of the body for 2-3 seconds.	The solder is evenly and smoothly coated on the surface of the immersed part of the lead, and the area is over 95%.
5.2	Welding heat resistance	Immerse the lead in tin liquid at 265℃ 5, with the liquid level 6mm away from the resistor, and the time is 5 1 second.	No visible damage, R25 D R∕R≤±2%
5.3	Lead-out strength	Tension: 5N, time: 10s-	No visible damage, R25 D R∕R≤±2%
5.4	Rapid temperature change	55℃30min→25℃min→125℃30min→ 25℃min, repeated 5 times, and recovered for 4 hours.	No visible damage, R25 D R∕R≤±2%
5.5	high-temperature	Temperature: 125℃, time: 16 hours.	No visible damage, R25 D R∕R≤±2%
5.6	cold	Temperature: -55℃, time: 2 hours.	No visible damage, R25 D R∕R≤±2%
5.7	low pressure	Air pressure: 40 0.1kpa for 4 hours.	No visible damage, R25 D R∕R≤±2%
5.8	Steady state warming	Temperature: 40℃, humidity: 93%, time: 500 12 hours.	No visible damage, R25 D R∕R≤±2%, Withstand voltage ≥700V∕AC1min insulation resistance ≥ 100 kω.
5.9	Alternating damp heat	Temperature: 25~40℃, humidity: 90%, time: 24 hours.	No visible damage, R25 D R∕R≤±2%, Withstand voltage ≥700V∕AC1min insulation resistance ≥ 100 kω.
5.10	Endurance of zero power consumption at upper limit temperature Persistence	Temperature: 125℃ 2℃ Time: 1000 24 hours.	No visible damage, R25 D R∕R≤±2%
5.11	vibrate	Frequency range: 10~500HZ, amplitude: 0.75mm or 98m∕S 2 time 2 hours,	No visible damage, R25 D R∕R≤±2%
5.12	collide	Acceleration: 250m ∕ S 2, pulse duration: 6Ms, 4000 collisions.	No visible damage, R25 D R∕R≤±2%

6, welding conditions

When welding, the welding place should be 6mm away from the root of the resistor, the welding temperature should be lower than 350℃, and the welding time should be as short as possible.

7. Storage conditions

Company Simple Introduction:

20 years experience on PTC/NTC thermistor field
Mainly market are Europe, North America, Asia
Competitive price
On time handle over
Competitive price
Inquiry answered in 24hrs
Good team waiting here to serve for you
RoHS &UL compatible
OEM & ODM business accept

Product Description:

Full range of thermistors displayed:

Dongguan Linkun Electronic Technology Co., Ltd. Dongguan Linkun Electronic Technology Co., Ltd. is a high-tech enterprise integrating R&D, manufacturing and sales, committed to becoming a high-quality supplier of circuit protection components. Since its establishment, the company has continuously introduced advanced automation equipment and imported technology, and has developed rapidly in the fields of varistors and thermistors. The company has a professional technical team and skilled technicians, and cooperates with three domestic universities to jointly develop new products to meet the different needs and circuit protection solutions of global customers. In addition, our products have passed safety certifications in many countries. From circuit design to product testing and finished products leaving the factory, we will provide you with one-stop service in the field of circuit protection. After years of intensive cultivation at Linkun Electronics, we have maintained good relationships with our peers and become distributors of many well-known electronic component brands to meet the different needs of customers. The main products include: thermistors, varistors, temperature sensors, fuses and their corresponding hardware and plastic accessories, sensors, thermal protectors, overload/composite protectors, discharge tubes, photoresistors, etc. Through the combination of various process equipment, our product supply is faster. Our products are widely used in: power adapters, switching power supplies, chargers, transformers, computers, phones, household appliances, communication products, lighting products, toy products, various instruments and various cables, electrical products, IT, consumer electronics products , automobiles, batteries and other fields. Quality policy: first-class quality, scientific management, continuous innovation, customer satisfaction! Linkun Electronics provides you with high quality, competitive prices and the best services, and becomes your loyal and reliable protection circuit component partner!

Business philosophy:

rational use of resources, customer satisfaction, high-quality products, continuous improvement.