5mm NTC thermistor β value is 3100~4500, R25℃ 500kΩ, MF11 504 suitable for wide temperature range
MF11 compensated thermistor
NTC (negative temperature coefficient) thermistor is a heat-sensitive semiconductor resistor whose resistance value decreases with the increase of temperature, and the resistance temperature coefficient is in the range of -2%/k~-6%/k, about 10 times that of the metal resistance temperature coefficient. The change in the resistance value of the NTC thermistor can be caused by the change in the external ambient temperature, or it can be caused by the flow of current and its own heating. Its various uses are based on this property. NTC thermistors are composed of polycrystalline ceramics with mixed oxides. The conductive mechanism of this material is quite complex.
Dongguan Linkun electronic Technology Co., LTD is the domestic earlier production NTC thermistor professional manufacturers, the company produces the NTC thermistor is widely used in all kinds of handheld devices and miniaturization of electronic devices, are widely used in all kinds of temperature measurement and temperature compensation, the company production of NTC thermistor with low price, good quality, It can completely replace foreign brands such as Murata, TDK and EPCOS. 1. The scope of application: used for temperature measurement and general accuracy in measuring equipment, temperature compensation of transistor circuit. 2. Characteristics: MF11: B value error range is small, the resistance error range in 5% of the products, its consistency, good interchangeability. MF12: a wide range of impedance values maximum nominal resistance up to 2 m, stability is good.
- The scope of application:
used for temperature measurement and general accuracy in measuring equipment, temperature compensation of transistor circuit.
MF11: B value error range is small, the resistance error range in 5% of the products, its consistency, good interchangeability.
MF12: a wide range of impedance values maximum nominal resistance up to 2 m, stability is good.
Appearance structure and size:
Main technical parameters:
Time constant ≤ 30 s
Measuring power ≤0.1 Mw
Use temperature range – 55 to ~ + 125 ℃
B value and allowable deviations are shown in the table below
Dissipation coefficient 6 mW / ℃
Rated power 0.5 W
Product number:
| Type | 25℃ when rated zero-power resistanc | B (value) |
| resistance (Ω) | allowable deviation range (%) | (25/50 ℃) nominal value (K) | Allow deviation (%) |
| MF11 | 3.3～33
6.8～68
15～150
33～330
68～680
150～1500
330～3300
680～6800
1500～15000
3300～33000 6800～68000
15000～150000
33000～330000
68000～680000
150000～5000000 | ±5 ±10
±20
| 2700
2830
2950
3100
3250
3400
3570
3740
3900
4050 4250
4450
4670
4800
5050 | ±5 |
Note: Our company can also supply according to the special requirements of users
Reduced power consumption curve:
A
mbient temperature (℃)
Rated power 0.5W
| Specification and model | Zero power resistance rated at 25℃ | Resistance value accuracy(%) | Value | B-value accuracy |
| MF11-050 | 5 | ±5
±10
±20 | 2400 | ±5
±10 |
| MF11-100 | 10 | 2800 |
| MF11-150 | 15 | 2800 |
| MF11-200 | 20 | 2800 |
| MF11-220 | 22 | 2800 |
| MF11-270 | 27 | 3000 |
| MF11-330 | 33 | 3000 |
| MF11-390 | 39 | 3000 |
| MF11-470 | 47 | 3100 |
| MF11-500 | 50 | 3100 |
| MF11-680 | 68 | 3100 |
| MF11-820 | 82 | 3100 |
| MF11-101 | 100 | 3200 |
| MF11-121 | 120 | 3200 |
| MF11-151 | 150 | 3200 |
| MF11-201 | 200 | 3200 |
| MF11-221 | 220 | 3500 |
| MF11-271 | 270 | 3500 |
| MF11-331 | 330 | 3500 |
| MF11-391 | 390 | 3500 |
| MF11-471 | 470 | 3500 |
| MF11-501 | 500 | 3500 |
| MF11-561 | 560 | 3500 |
| MF11-681 | 680 | 3800 |
| MF11-821 | 820 | 3800 |
| MF11-102 | 1000 | 3800 |
| MF11-122 | 1200 | 3800 |
| MF11-152 | 1500 | 3800 |
| MF11-202 | 2000 | 4000 |
| MF11-222 | 2200 | 4000 |
| MF11-272 | 2700 | 4000 |
| MF11-302 | 3000 | 4000 |
| MF11-332 | 3300 | 4000 |
| MF11-392 | 3900 | 4000 |
| MF11-472 | 4700 | 4050 |
| MF11-502 | 5000 | 4050 |
| MF11-562 | 5600 | 4050 |
| MF11-682 | 6800 | 4050 |
| MF11-822 | 8200 | 4050 |
| MF11-103 | 10000 | 4050 |
| MF11-123 | 12000 | 4050 |
| MF11-153 | 15000 | 4150 |
| MF11-203 | 20000 | 4300 |
| MF11-303 | 30000 | 4300 |
| MF11-473 | 47000 | 4300 |
| MF11-503 | 50000 | 4300 |
| MF11-683 | 68000 | 4300 |
| MF11-104 | 100000 | 4500 |
| MF11-124 | 120000 | 4700 |
| MF11-154 | 150000 | 4700 |
| MF11-204 | 200000 | 4700 |
| MF11-304 | 300000 | 4700 |
| MF11-504 | 500000 | 4800 |
| MF11-105 | 1000000 | 4900 |
Note: Our company can also supply according to the special requirements of customers
MF72 Power NTC Thermistor Series
Applications
Coversion power-supply, switch power, ups power
Electronic energy saving lamps,electronic ballast and all kinds of electric heater
All kinds of RT, display
Bulb and other lighting lamps
Conventional product electrical performance parameters
| Part No.Mf72 | R25 | Max,Steady Stale Current(A) | Approx. R of Maz.Cur. | Dissi.Coef.(MW/℃) | Thermal time Constant(S) | Operating Temp.(℃) |
| 5D5 | 5 | 1 | 0.353 | 6 | 20 | -55~+200 |
| 10D5 | 10 | 0.7 | 0.771 | 6 | 20 |
| 60D5 | 60 | 0.3 | 1.878 | 6 | 18 |
| 200D5 | 200 | 0.1 | 18.70 | 6 | 18 |
| 5D7 | 5 | 2 | 0.283 | 10 | 30 |
| 8D7 | 8 | 1 | 0.539 | 9 | 28 |
| 10D7 | 10 | 1 | 0.616 | 9 | 27 |
| 12D7 | 12 | 1 | 0.816 | 9 | 27 |
| 16D7 | 16 | 0.7 | 1.003 | 9 | 27 |
| 22D7 | 22 | 0.6 | 1.108 | 9 | 27 |
| 33D7 | 33 | 0.5 | 1.485 | 10 | 28 |
| 200D7 | 200 | 0.2 | 11.65 | 11 | 28 |
| 3D9 | 3 | 4 | 0.120 | 11 | 35 |
| 4D9 | 4 | 3 | 0.190 | 11 | 35 |
| 5D9 | 5 | 3 | 0.210 | 11 | 34 |
| 6D9 | 6 | 2 | 0.315 | 11 | 34 |
| 8D9 | 8 | 2 | 0.400 | 11 | 32 |
| 10D9 | 10 | 2 | 0.458 | 11 | 32 |
| 12D9 | 12 | 1 | 0.652 | 11 | 32 |
| 16D9 | 16 | 1 | 0.802 | 11 | 31 |
| 20D9 | 20 | 1 | 0.864 | 11 | 30 |
| 22D9 | 22 | 1 | 0.950 | 11 | 30 |
| 30D9 | 30 | 1 | 1.022 | 11 | 30 |
| 33D9 | 33 | 1 | 1.124 | 11 | 30 |
| 50D9 | 50 | 1 | 1.252 | 11 | 30 |
| 60D9 | 60 | 0.8 | 1.502 | 11 | 30 |
| 80D9 | 80 | 0.8 | 2.010 | 11 | 30 |
| 120D9 | 120 | 0.8 | 3.015 | 11 | 30 |
| 200D9 | 200 | 0.5 | 5.007 | 11 | 32 |
| 400D9 | 400 | 0.2 | 30.30 | 11 | 32 |
| 2.5D11 | 2.5 | 5 | 0.095 | 13 | 43 |
| 3D11 | 3 | 5 | 0.100 | 13 | 43 |
| 4D11 | 4 | 4 | 0.150 | 13 | 44 |
| 5D11 | 5 | 4 | 0.156 | 13 | 45 |
| 6D11 | 6 | 3 | 0.240 | 13 | 45 |
| 8D11 | 8 | 3 | 0.255 | 14 | 47 |
| 10D11 | 10 | 3 | 0.275 | 14 | 47 |
| 12D11 | 12 | 2 | 0.462 | 14 | 48 |
| 16D11 | 16 | 2 | 0.470 | 14 | 50 |
| 20D11 | 20 | 2 | 0.512 | 15 | 52 |
| 22D11 | 22 | 2 | 0.563 | 15 | 52 |
| 30D11 | 30 | 1.5 | 0.667 | 15 | 52 |
| 33D11 | 33 | 1.5 | 0.734 | 15 | 52 |
| 50D11 | 50 | 1.5 | 1.021 | 15 | 52 |
| 60D11 | 60 | 1.5 | 1.215 | 15 | 52 |
| 80D11 | 80 | 1.2 | 1.656 | 15 | 52 |
| 1.3D13 | 1.3 | 7 | 0.062 | 13 | 52 |
| 1.5D13 | 1.5 | 7 | 0.073 | 13 | 60 |
| 2.5D13 | 2.5 | 6 | 0.088 | 13 | 160 |
| 3D13 | 3 | 6 | 0.092 | 14 | 60 |
| 4D13 | 4 | 5 | 0.120 | 15 | 67 |
| 5D13 | 5 | 5 | 0.125 | 15 | 68 |
| 6D13 | 6 | 4 | 0.170 | 15 | 65 |
| 7D13 | 7 | 4 | 0.188 | 15 | 65 |
| 8D13 | 8 | 4 | 0.194 | 15 | 60 |
| 10D13 | 10 | 4 | 0.206 | 15 | 65 |
| 12D13 | 12 | 3 | 0.316 | 16 | 65 |
| 15D13 | 15 | 3 | 0.335 | 16 | 60 |
| 16D13 | 16 | 3 | 0.338 | 16 | 60 |
| 20D13 | 20 | 3 | 0.372 | 16 | 65 |
| 30D13 | 30 | 2.5 | 0.517 | 16 | 65 |
| 47D13 | 47 | 2 | 0.810 | 17 | 65 |
| 120D13 | 120 | 1.2 | 2.124 | 16 | 65 |
| 1.3D15 | 1.3 | 8 | 0.048 | 18 | 65 |
| 1.5D15 | 1.5 | 8 | 0.052 | 18 | 68 |
| 3D15 | 3 | 7 | 0.075 | 18 | 69 |
| 5D15 | 5 | 6 | 0.112 | 18 | 76 |
| 6D15 | 6 | 5 | 0.155 | 20 | 76 |
| 7D15 | 7 | 5 | 0.173 | 20 | 80 |
| 8D15 | 8 | 5 | 0.178 | 20 | 80 |
| 10D15 | 10 | 5 | 0.180 | 20 | 80 |
| 12D15 | 12 | 4 | 0.250 | 20 | 80 |
| 15D15 | 15 | 4 | 0.268 | 21 | 75 |
| 16D15 | 16 | 4 | 0.276 | 21 | 75 |
| 20D15 | 20 | 4 | 0.288 | 21 | 85 |
| 30D15 | 30 | 3.5 | 0.438 | 21 | 70 |
| 47D15 | 47 | 3 | 0.680 | 21 | 86 |
| 120D15 | 120 | 1.8 | 1.652 | 22 | 87 |
| 0.7D20 | 0.7 | 11 | 0.018 | 24 | 89 |
| 1.3D20 | 1.3 | 9 | 0.037 | 24 | 88 |
| 3D20 | 3 | 8 | 0.055 | 24 | 88 |
| 5D20 | 5 | 7 | 0.087 | 24 | 87 |
| 6D20 | 6 | 6 | 0.113 | 25 | 103 |
| 8D20 | 8 | 6 | 0.142 | 25 | 105 |
| 10D20 | 10 | 6 | 0.162 | 25 | 102 |
| 12D20 | 12 | 5 | 0.195 | 25 | 100 |
| 16D20 | 16 | 5 | 0.212 | 25 | 100 |
| 0.7D25 | 0.7 | 12 | 0.014 | 30 | 120 |
| 1.5D25 | 1.5 | 10 | 0.027 | 30 | 121 |
| 3D25 | 3 | 9 | 0.044 | 32 | 124 |
| 5D25 | 5 | 8 | 0.070 | 32 | 125 |
| 8D25 | 8 | 7 | 0.114 | 33 | 125 |
| 10D25 | 10 | 7 | 0.130 | 32 | 125 |
| 12D25 | 12 | 6 | 0.156 | 32 | 126 |
| 16D25 | 16 | 6 | 0.160 | 35 | 126 |
Application·Scope
Features:
- Product Name: NTC Thermistor
- Resistance value accuracy(%): ±5%, ±10%, ±20%
- Beta Value: 3100~4500
- Chip: NTC Thermistor
- Model: MF11 Temperature Compensated NTC Thermistor
- Resistance: R25℃=2kΩ
- Other related products: MF55 film thermistor, MF52 temperature measuring thermistor, MF55 film thermistor
Technical Parameters:
| Attribute | Value |
| Chip | NTC Thermistor |
| Model | MF11 Temperature Compensated NTC Thermistor |
| Nominal Diameter | 5mm |
| Lead Length | 30mm |
| Lead Style | Straight Lead; Bend Lead |
| Operating Temperature Range | -55°C To 125°C |
| Resistance | R25℃=2kΩ |
| Resistance Value Accuracy(%) | ±5%, ±10%, ±20% |
| Beta Value | 3100~4500 |
| Color | Green, Black |
Applications:
The NTC thermistor has a beta value of 3100~4500 and a nominal diameter of 5mm. Its resistance value at 25℃ is 2kΩ, with a resistance value accuracy of ±5%, ±10%, or ±20%. The lead length of the thermistor is 30mm. The price of this product is 0.045 USD per piece, with a minimum order quantity of 5000 pieces. The product is packaged in bulk, with 500 pieces per polybag, and has a delivery time of 7 workdays. Payment terms are T/T, and the supply ability is 20,000,000 pieces per week.
The NTC thermistor has various product application occasions and scenarios. The MF58 glass sealed thermistor is suitable for temperature measurement and control in household appliances, such as air conditioners, refrigerators, and water heaters. The MF5 Single-ended glass sealed thermistor is used in temperature measurement and control of electronic devices, such as computers, smartphones, and tablets. The MF11 temperature compensated thermistor is used in temperature compensation circuits for various devices, such as automotive electronics, power supplies, and communication equipment.
Customization:
Our Model Number is MF11 Temperature Compensated NTC Thermistor. This NTC thermistor has a Beta Value of 3100~4500, a Lead Length of 30mm and an Operating Temperature Range of -55°C To 125°C. The Norminal Diameter is 5mm.
At lin kun, we offer customization services for the NTC thermistor product to meet your specific requirements. We offer MF55 film thermistor, MF55 film thermistor, and MF5 Single-ended glass sealed thermistor. Contact us today to learn more about our product customization services!
Support and Services:
Our NTC Thermistor product comes with comprehensive technical support and services that include:
- Expert technical assistance to help you choose the right thermistor for your application
- Customization services to meet your specific requirements
- Calibration and testing services to ensure accurate and reliable performance
- Repair and maintenance services to extend the life of your thermistor
- Training and educational resources to help you maximize the benefits of your thermistor
Packing and Shipping:
Product Packaging:
The NTC Thermistor product will be packed securely in a cardboard box with cushioning materials to ensure safe transportation. The product will be labeled with its name, model number, and other necessary information.
Shipping:
The product will be shipped via a reputable courier service that provides tracking information. The shipping cost will be calculated based on the destination and shipping method chosen by the customer. The estimated delivery time will be provided at the time of purchase and may vary depending on the location and shipping method.
FAQ:
Q1: What is the brand name of the thermistor?
A1: The brand name of the thermistor is lin kun.
Q2: What is the model number of the thermistor?
A2: The model number of the thermistor is NTC thermistor.
Q3: Where is the thermistor manufactured?
A3: The thermistor is manufactured in Dong Guan, China.
Q4: Does the thermistor have any certifications?
A4: Yes, the thermistor is certified by ROHS and UL.
Q5: What is the minimum order quantity for the thermistor?
A5: The minimum order quantity for the thermistor is 5000 PCS, and the price is 0.045 USD per piece. The packaging details are bulk, with 500 pieces per polybag. The delivery time is 7 workdays, and the payment terms are T/T. Our supply ability is 20,000,000PCS per week.
