CDS 5528 Bright Resistor 10Lux 10-20KΩ Photoresistor, Spectral Peak
540nm, Suitable For Light-Controlled Switches
A photoresistor is a resistor made of semiconductor material whose
conductivity changes linearly with changes in illumination.
Photoresistors are widely used in toys, lamps, cameras and other
industries.
Schematic
Unit:mm
Performance and features
Epoxy resin encapsulation, good reliability
Small size and high sensitivity
Fast response speed and good spectral characteristics
Application scope
Camera automatic metering Photoelectric control
Indoor light control Alarm
Industrial control Light control switch
Light control lamp Electronic toys
Models and Specifications
| Specification | Model | Max Voltage VDC | Max Power consumptionmw | Environment temperature℃ | Spectrum peaknm | Bright resistor(10Lux) KΩ | Dark resistance≥ MΩ | γ100 10 | Response time(ms) | Illuminance characteristic diagram number |
| Rise | Decline |
| φ5series | GM5506 | 150 | 90 | -30~+70 | 540 | 2-5 | 0.1 | 0.5 | 30 | 30 | 1 |
| GM5516 | 150 | 90 | -30~+70 | 540 | 5-10 | 0.2 | 0.5 | 30 | 30 | 1 |
| GM5528 | 150 | 100 | -30~+70 | 540 | 10-20 | 1 | 0.6 | 20 | 30 | 2 |
| GM5537-1 | 150 | 100 | -30~+70 | 540 | 20-30 | 2 | 0.6 | 20 | 30 | 3 |
| GM5537-2 | 150 | 100 | -30~+70 | 540 | 30-50 | 3 | 0.7 | 20 | 30 | 3 |
| GM5539 | 150 | 100 | -30~+70 | 540 | 50-100 | 5 | 0.8 | 20 | 30 | 4 |
| GM5549 | 150 | 100 | -30~+70 | 540 | 100-200 | 10 | 0.9 | 20 | 30 | 5 |
Measurement conditions
Maximum applied voltage: the maximum voltage that can be
continuously applied to the component in the dark;
Dark resistance: The resistance value at the 10th second after
turning off the 10Lux light;
Maximum power consumption: Maximum power consumption when the
ambient temperature is 25°C;
Brightness resistance: Test value under 10Lux light of standard
light source (color temperature 2854K) after irradiation with
400-600Lux light for 2 hours;
γ value: The logarithm of the ratio of the standard resistance
value under 10Lux illumination and 100Lux illumination.
Lg (R10/R100)
γ= =Lg(R10/R100)
Lg (100/10)
R10､R100 are the resistance values under 10Lux and 100Lux
illumination respectively (the tolerance of γ is ±0.1)
Precautions
1. This product is packed with environmentally friendly materials,
with 200 pieces in small packaging and 2,000 pieces in large
packaging;
2. Avoid storing this product in humid and high-temperature
environments;
3. It should be stored in non-corrosive gas, otherwise the tin
plating layer will be oxidized and the solderability will be
reduced.
Therefore, it should be used as soon as possible after opening the
package.
4. Working environment humidity ≦95%
5. The welding time should be as short as possible; immerse it in
230℃ tin liquid (Sn63 Pb37) to a distance of 5mm from the CdS
photoresistor body and maintain it for 3-5 seconds.
6. Note that the lead welding position should be more than 4mm away
from the ceramic base.
Product Description:
Light Dependent Resistor (LDR) is a 5mm series photoresistor with a
high sensitivity to light and a fast response time. With a peak
sensitivity of 540nm and a response time of 30ms for both rise time
and fall time, LDR is able to detect even the faintest light
sources. The power consumption is only 90mW, and the bright
resistor at 10Lux is within the range of 2-5KΩ. LDR also provides a
3mm and 12mm series photoresistor for different applications. With
the 5mm lead length, it is the ideal choice for light sensing
applications.
Features:
- Product Name: Light Dependent Resistor
- Max Voltage VDC: 150 V
- Spectrum peaknm: 540
- Lead Length: 5mm
- 5mm Series Photoresistor
- GM55 Series Photoresistor
- 3mm Series Photoresistor
- Environment temperature℃: -30~+70°C
- Dark resistance: 0.2MΩ
Technical Parameters:
| Parameter | Value |
|---|
| Product Name | Light Dependent Resistor |
| Model | GM5506 |
| Lead Length | 5mm |
| Power consumptionmw | 90 |
| Environment temperature℃ | -30~+70°C |
| Bright resistor(10Lux) | (2-5)KΩ |
| Dark resistance | 0.2MΩ |
| Response time(ms) | Rise 30ms Decline 30ms |
| Max VoltageVDC | 150 V |
| Spectrum peaknm | 540 |
Applications:
LINKUN Photoresistor 5506: Environment-Friendly Resistance Sensor
for Accurate Light Detection
LINKUN Photoresistor 5506 is the environment-friendly resistance
sensor for accurate light detection. It is designed for
applications where reliable light measurement is needed, such as
outdoor lighting system, solar energy system, and so on. The model
number of this photoresistor is GM5506, and it is manufactured by
LINKUN, a well-known brand in the electronic industry. This
photoresistor features a 5mm lead length, a power consumption of 90
mw, and an operating temperature range from -30 to +70°C. It is
also able to detect light accurately with a bright resistor of
2-5KΩ at 10Lux.
LINKUN Photoresistor 5506 is a reliable and cost-effective way to
detect light accurately in various applications. This product is
available in both 5mm series and 3mm series for different
requirements. The 5mm series is suitable for applications with a
higher light detection accuracy, while the 3mm series is suitable
for applications with a lower light detection accuracy. With its
superior performance and reliable quality, LINKUN Photoresistor
5506 is the ideal solution for your light detection needs.
Customization:
Customized Light Dependent Resistor Service
Brand Name: LINKUN
Model Number: Photoresistor 5506
Place of Origin: Dongguan, Guangdong, China
Response time(ms): Rise30ms Decline30ms
Spectrum peaknm: 540
Model: GM5506
Max VoltageVDC: 150V
Lead Length: 5mm
7mm series photoresistor: available
We offer customizable light dependent resistors for your specific
needs. Our LINKUN Photoresistor 5506 model is designed for maximum
performance and reliability. It has a response time of 30ms and a
spectrum peaknm of 540. The maximum voltage VDC is 150V and the
lead length is 5mm. We also offer 7mm series photoresistors.
Support and Services:
Light Dependent Resistor Technical Support and Services
We offer technical support and services for our Light Dependent
Resistor products. Our services include:
- Replacement of defective parts and components
- Assistance with installation and setup
- Troubleshooting and repair
- Regular maintenance check-ups
- Answering any questions about the product
To get assistance with your Light Dependent Resistor product,
please contact us through our website or call our customer service
line.
Packing and Shipping:
Packaging and Shipping
Light Dependent Resistors are packaged in a thermally sealed
plastic or metal container and shipped in a box, or on a pallet,
depending on the size of the order.
FAQ:
Q&A
Q1: What is the Brand Name of the Light Dependent Resistor?
A1: The Brand Name of the Light Dependent Resistor is LINKUN.
Q2: What is the Model Number of the Light Dependent Resistor?
A2: The Model Number of the Light Dependent Resistor is
Photoresistor 5506.
Q3: Where is the Light Dependent Resistor produced?
A3: The Light Dependent Resistor is produced in Dongguan,
Guangdong, China.
Q4: What is the range of working voltages for the Light Dependent
Resistor?
A4: The range of working voltages for the Light Dependent Resistor
is from 0.2V to 0.9V.
Q5: What is the operating temperature range for the Light Dependent
Resistor?
A5: The operating temperature range for the Light Dependent
Resistor is -30℃ to 80℃.
