MF51 Glass Sealed Temperature Measurement NTC Thermistor Series
MF58D single-ended glass-sealed NTC thermistor adopts radial lead
single-ended glass seal
Product Introduction
High temperature resistant NTC thermistor series:
MF58 diode glass-sealed NTC thermistor
MF58D/MF51 radial lead glass-sealed NTC thermistor
Small size, extremely short response time, high heat resistance
• [Business Scope]
The company's main products are: NTC thermistors, NTC temperature
sensors, NTC temperature probes, NTC temperature sensing wires, NTC
temperature measurement wires, micro NTC custom designs, etc. The
products are widely used in home appliances, communications,
electricity, medical equipment, test instruments, power supply
equipment, industrial electronic equipment and other fields.
| Model: | MF58A- 100KF3950 |
| Type: | Thermistor |
| Technology: | Metal oxide |
| Resistance: | 100K ohm |
| Accuracy: | +/- 1％ |
| Power Rating: | ≤25mw |
| Temperature Coefficient: | Negative Temperature Coefficient |
| Operating Temperature: | -25~ + 300C |
| Part Number: | MF58A- 100KF3950 |
| 25 Degree Resistance: | 100KOm +/- 1％ |
| Beta Value 25/85C: | 3950K +/- 1％ |
| Time Constant: | ≤5S |
| Package: | Glass packaging |
| Insulation Resistance: | ≥100Mohm |
| Max Power Rating: | ≤25mW |
MF58D/MF51D single-ended glass-sealed NTC thermistor description
The MF51D series glass-sealed thermistors are a special type of NTC
thermistor. These small thermistors are encapsulated with a
glass-sealed design and can work in various environments such as
high humidity and rapid thermal cycles. It can eliminate resistance
reading errors caused by moisture penetration and can work
effectively under extreme temperatures and harsh environmental
conditions.
This type of thermistor is not limited by soldering temperature and
can provide users with a wide operating temperature range of "-55°C
to +200°C". The device has a diameter of only 1.5 mm and is small
in size, which can be packaged in various housings, such as ring
lugs and hexagonal nuts. Radial lead glass encapsulated thermistors
provide a low-cost option for applications that require excellent
stability and high temperature operation. The small size enables
the sensor to respond quickly to small temperature changes.
MF58D/MF51D single-ended glass-sealed NTC thermistor adopts radial
lead single-ended glass-sealed NTC thermistor, and there is also
MF58 diode glass-sealed NTC thermistor. MF58D/MF551D radial lead
glass-sealed NTC thermistor has the characteristics of small size,
extremely short response time, heat resistance and high stability.
The temperature measurement range is -40℃ to +300℃. It is widely
used in temperature measurement, detection, indication, monitoring,
measurement, control, calibration and compensation, etc.
MF58D single-ended glass-sealed NTC thermistor resistance
characteristics
1. Glass encapsulation, heat resistance, high stability. Resistant
to moisture and other environmental factors.
2. The glass body provides airtight sealing and voltage insulation,
and can work in high temperature and humid environments.
3. The operating temperature range is -50˚C to 300˚C
4. Extremely short response time, smaller size, high sensitivity
and faster thermal response than traditional thermistors
5. Small size
6. Common resistance values: 25℃ 2k ohm, 10k ohm, 49k ohm, 50k ohm,
100k ohm, 200k ohm, 231.5k ohm, etc. (values at 25˚C range from
2186Ω to 1.38MΩ)
7. Temperature measurement and control. High resistance and B value
accuracy,
8. Strong high temperature stability, fast thermal induction, high
sensitivity
9. Lead wire: Insulated Dumet wire (copper-clad FeNi)
10. Proven long-term reliability and low power consumption.
Dissipation factor: ≥2.0mW/C.
11. Thermal time constant: ≤6.5 seconds in still air.
MF58D single-ended glass-encapsulated NTC thermistor application
examples:
■ Temperature measurement, detection and control of household
appliances: refrigerators, microwave ovens, rice cookers, induction
cookers, pressure cookers, ovens, water heaters, kettles, coffee
pots, etc.
■ Medical industry: electronic thermometers.
■ Heating and air conditioning (HVAC): used to determine exhaust
gas or burner temperature in heating cost allocators, floor heating
and gas boilers.
■ Industrial electronics: used for temperature stabilization of
laser diodes and optoelectronic components, temperature
compensation of copper coils or reference point compensation of
thermal elements, etc. Also used for temperature measurement and
compensation of instruments, meters, integrated circuits, quartz
crystal oscillators and thermocouples.
■ Communications: for temperature measurement
■ Automobiles (water, air intake, environment, batteries, engines
and fuels), hybrid vehicles, fuel cell vehicles, automotive
electronics
■ Assembled into various temperature sensor probes
■ General instrument applications
NTC Type Thermistor is a kind of MF51 Single-ended glass sealed
thermistor, MF55 film thermistor and MF58 glass sealed thermistor,
with thermal time constant of 20S, dissipation factor of 22mW/C(In
Still Air), tolerance of 2mw/°C, and allowable tolerance of ±1%,
±2%, ±3%, ±5%. It also has B-Value range of 3100K-4750K ±1%.
Features:
- Product Name: NTC Type Thermistor
- Allowable Tolerance: ±1%, ±2%, ±3%, ±5%
- Thermal Time Constant: 20S
- Dissipation Factor: 22mW/C(In Still Air)
- Shape: Axial Leaded
- Resistance Range: 1KΩ To 500KΩ
- Material: MF58 Glass Sealed Thermistor, MF55 Film Thermistor, MF11
Temperature Compensated Thermistor
Technical Parameters:
| Product Name | Thermal Time Constant |
|---|
| MF51 Single-ended Glass-sealed NTC Thermistor Series | 20S |
| Operating Temperature | Shape |
|---|
| -55°C To +300°C | Axial Leaded |
| Allowable Tolerance | Rated Power |
|---|
| ±1% ±2% ±3% ±5% | ≤50mW |
| B-Value | Tolerance |
|---|
| 3100K-4750K ±1% | 2mw/°C |
| Resistance Range | Dissipation Factor |
|---|
| 1KΩ To 500KΩ | 22mW/C(In Still Air) |
Applications:
Lin Kun's MF51 Single-ended glass-sealed NTC thermistor series is
the perfect choice for temperature-based applications. Its
resistance range of 1KΩ to 500KΩ and B-Value of 25/50: 3100K-4750K
±1% makes it ideal for temperature measurement and control. The
thermistor has an thermal time constant of 20S and an allowable
tolerance of ±1%, ±2%, ±3%, ±5%. The series is certified by ROHS
and UL and is available in bulk, 500pcs per polybag. Minimum order
quantities are 5000 PCS with a price of 0.045 USD/ PCS. The supply
ability is 20,000,000PCS per week and delivery time is 7 workdays.
Payment terms are T/T. This series is ideal for MF55 film
thermistor, MF11 temperature compensated thermistor, MF52
temperature measuring thermistor, and MF51 glass-sealed NTC
thermistor.
Customization:
NTC Type Thermistor
Brand Name: lin kun
Model Number: MF51 Single-ended glass-sealed NTC thermistor series
Place of Origin: China Dong Guan
Certification: ROHS,UL
Minimum Order Quantity: 5000 PCS
Price: 0.045 USD/ PCS
Packaging Details: Bulk,500pcs per polybag
Delivery Time: 7 workdays
Payment Terms: T/T
Supply Ability: 20,000,000PCS per week
Resistance Range: 1KΩ To 500KΩ
Product Name: MF51 Single-ended Glass-sealed NTC Thermistor Series
Thermal Time Constant: 20S
Shape: Axial Leaded
Allowable Tolerance: ±1% ±2% ±3% ±5%
MF52 temperature measuring thermistor, MF52 temperature measuring thermistor, MF58 glass sealed thermistor, MF58 glass sealed thermistor
Support and Services:
NTC Type Thermistor Technical Support and Service
We offer technical support and services for our NTC type
thermistors. Our experienced team of professionals can help you
find the right product for your application and answer any
questions you may have. We also offer a variety of services such as
product testing, customization, and installation. Our customer
service team is available to assist you with any of your needs.
We are committed to providing our customers with the highest
quality products and services. Our team is highly knowledgeable and
experienced in the thermistor industry. We are dedicated to
providing our customers with the best support and services
possible.
If you have any questions or concerns about our NTC type
thermistors, please do not hesitate to contact us. We are here to
assist you in finding the right product for your application, as
well as helping you with any technical support or service needs you
may have.
Packing and Shipping:
NTC Type Thermistor Packaging and Shipping:
- The NTC type thermistors are packaged in strong, sealed boxes to
protect them from moisture.
- The thermistors are shipped from the factory in these boxes and
placed in reinforced cardboard containers.
- The containers are then placed in wooden crates for additional
protection during long-distance transportation.
FAQ:
Q1: What is NTC Type Thermistor?
A1: NTC Type Thermistor is a kind of resistor with a negative
temperature coefficient, which means that the resistance of the
thermistor will decrease as temperature increases.
Q2: What is the product brand?
A2: The product brand is lin kun.
Q3: What is the model number?
A3: The model number is MF51 Single-ended glass-sealed NTC
thermistor series.
Q4: Where is the place of origin?
A4: The place of origin is China Dong Guan.
Q5: What is the minimum order quantity?
A5: The minimum order quantity is 5000 PCS.
